| 1. | Reciprocating internal combustion engine driven current generating sets . part 10 : measurement of airbone noise by the enveloping surface method
往复式内燃机驱动的电流发电机组.第10部分:包络面法测量空气中噪声 |
| 2. | Can last - mile broadband be developed in a way that doesn ' t rely on the incentives that drive current providers toward innovation - stifling business models
最后一里的宽带能否在一种不依赖现有的激励方式下发展供应商趋向于压制创新的商业模式？ |
| 3. | Considering the characteristics of the fog , a scheme of controlling the driving current by the feed back light from the coupler and detector of fog was discussed
结合光纤陀螺特点，讨论了从光纤陀螺耦合器和探测器提取信号进行光反馈控制的方案。 |
| 4. | The drive current control method of magnetorheological damper was designed by force error of suspension damper control force and output force of magnetorheological damper
根据悬架阻尼控制力与磁流变阻尼器输出阻尼力的力误差，设计了磁流变阻尼器驱动电流控制方法。 |
| 5. | Then we studied the bmhmt method of soi mosfet and its merit : larger drive current which enables it to be the candidate of bjt in realizing bicmos circuits
之后我们研究了soimosfet的bmhmt工作模式，同时介绍了这种工作模式的优点:驱动电流大,可替代bicmos电路中的三极晶体管实现bicmos电路。 |
| 6. | Power mosfet is a voltage - controlled appliance which has a fast switch speed , small driven current and higher threshold voltage . so it is the ideal power interface component of micro - computer
功率mosfet是一种电压控制型器件，开关速度快，驱动电流小，开启电压较高，是微机的理想接口部件。 |
| 7. | Stand - alone scanner mainframes are designed to allow system developers to plug switching cards with relays into slots in the mainframe , which supplies the relay drive current and various controls for the relays
利用独立扫描仪主机，系统设计者可以将含继电器的开关卡插入到主机的插槽中，主机为继电器提供驱动电流和各种控制。 |
| 8. | The hardware of system is used sensor and signal conditioning circuit to collect the signal and communication with the computer using the pci2013 . for the undulation of temperature and driven current will influence the testing result , they need to be invariableness during testing
系统硬件以传感器和相应的信号调理电路作为前向通道拾取被测信号,利用基于pci高速总线的pci2013数据采集卡和串口模块实现与计算机的数据传输和命令通讯。 |
| 9. | In the diagram , the output of the error amp is connected to the base of an npn transistor : when the error amp drives current into this transistor ' s base , it allows current to flow from collector to emitter , and that transistor in turn pulls current from the base of the pass transistor
在这个图里，误差放大器的输出端连接到了一个npn三极管的基极上：当误差放大器输出电流到了三极管的基极上，三极管允许电流从集电极向发射极流动，这个传输三极管工作时就是就是从基极吸取电流的过程。 |
| 10. | Resu1 t ana1 yzing and dec i si on support s } ' stem etc . first1y the who11 } construct ion of dianchi system is d i scus sed , t hen hydrodynami c mode 1 " geograph i c informat i on system ( gis ) image processing and network commun1 cat l on are s t u d i e d d e t a i 1 ed 1 v . two - - dimensi onal wind - - driven current s mode1 on shal1 ow water i s used as hvdrodvnamic mode1
一个复杂系统的仿真实现，需要多种理论及技术手段的参与。滇池系统的设计涉及多个方面的内容，包括模型、数据库、显示系统、结果分析和决策支持等等。本文首先从系统的角度阐述滇池系统的组成，然后对系统中水动力模型、地理信息系统( gis ) 、图像处理和网络通信部分的设计过程进行详细说明。 |
